 |
The
DLT Certifier system is an outstanding DLT cartridge certification
system to evaluate and record defects. This machine automatically
recognizes and adjusts the tension for DLT I, DLT II, DLT
III, and DLT IV cartridges. It incorporates a ten cartridge
autoloader processor and a separate control panel cabinet
to enable the user to process and record a large amount of
media information without remaining at the machine. The machine
cleans at 200 ips and certifies at 120 ips.
|
 |
The basic certification
of the tape cartridge is completed in one pass. The tape is automatically
extracted from the cartridge, wrapped around four automatically
advancing cleaning tissues, cleaned by a sapphire blade, and magnetically
tested. A one MHz signal is electronically written across the full
width of the tape. The tape is read by an in-line, multi-track longintudinal
read head to detect any signal absence on the tape, thereby detecting
magnetic defects in the tape. The tape speed is reduced to 120 ips
during the testing cycle, and defect locations are stored in RAM
for later examination--either on the control panel or on a printed
defect report.
Operating Mode
- Clean Only
- Clean and test
- Test Only
Error Display
- Performance displayed
on PC Screen.
- Drive status display
provided on a back-lit, two line, 40 character LCD screen.
- Reports created
on PC using RS 232 interface
Error Analysis
- Temporary errors
- Permanent errors
- Error Correction
Codes Provided per ANSI specifications by track
- User selectable
threshold provided
Tape Transport
- Brushless DC motors
- Air Bearing Tape
Path
Programming
- Windows compatible
- Point and click
Mouse applications
The voltage on this machine is an autoranging
100 VAC to 280 VAC; 50/60 Hz.
Features:
- DLT Compatible Testing
- Automatically recognizes DLT I,
II, III, and IV Cartridges
- Automatically adjusts tape tension
- 10 Magazine Autoloader
- Processes tape at 200 ips per second
- Four Fabric Cleaning Tissues
- Bi-Directional sapphire Cleaning
Blade
- Separate cabinet for control electronics
and reporting
- Read/Write heads warranted for eighteen
(18) months on a replace or repair condition
- Extended warranty available
Applications:
- Corporate Computer Organizations
- Educational Institutions
- Government Security Sites
- Large Corporations
- Military
- Technical Organizations
- Repair Facilities
- Seismic industry researchers
- Oil and Gas Industry
- Banks and financial institutions
- Media Reprocessors
- Reel archive storage companies
Media Certified:
- DLT I cartridges
- DLT II and III cartridges
- DLT IV cartridges
|
