Data-Link Associates is proud to introduce the first LTO (Linear Tape Open) tape cleaner available on the market. The LTO cleaners employ the basic time proven cleaning principles that have been the hallmark of commitment to quality tape care. The all new LTO cartridge tape cleaners clean, re-tension and optically scan all LTO compatible cartridges. .
The benefit of cleaning your LTO tapes is the assurance that your cartridges are functioning at optimum performance levels. By removing surface debris that interferes with head to tape contact, you greatly reduce dropouts as well as prolong the life of expensive magnetic heads. At 200 ips (inches per second) the LTO cleaners can process a 2000 foot cartridge (LTO 1) in approximately 5 1/2 minutes (from insertion to ejection).
In one cycle the tape is automatically extracted from the cartridge, wrapped around four (4) automatically advancing tissue stations, cleaned by a sapphire blade (if engaged), optically inspected and then ejected or returned to the magazine ( LTO-A ). The automatically advancing cleaning tissue is made of non-shedding nylon material that is placed in such a position, both upstream and downstream of the sapphire cleaning blade, that both sides of the tape are cleaned twice. The cleaning blade, which burnishes the tape, is a precise bi-directional double-edged sapphire blade designed to remove debris adhered to the tape.
The Optical Scanning feature allows you to purge your library of defective cartridges thereby improving the system process time. The optical scanner detects edge damage and tape deformities, such as creases and folds. An indicator on the control panel is provided that counts and displays the number of defects in the tape. In the LTO-S (single cartridge) tape cleaner, after the tape has been cleaned/inspected, an UP and DOWN scan feature indicates the location of each defect that occurred. A print option (P) can be added to provide the operator with a hard copy of the scan information (defect count and location). On the LTO-A, which is equipped with an autoloader, the user can process a magazine of up to ten (10) LTO cartridges at a time for hands-off operation. This option gives the operator a simple PASS/FAIL indicator for each cartridge so that when a magazine of cartridges is completed the status of each cartridge is clearly displayed as PASS or FAIL. If a detailed defect analysis is required (defect count, position and sequence number) units with an autoloader must have the printer (P) option installed.
|
